Beli Solenoid Switch di monotaro.id

- US series is direct-acting, conductive, and normally closed (NC) 2/2 way solenoid valve.- Able to be operated directly without pressure- Material PTFE is suitable for steam.

Solenoid valve MYCOM made in Japan. Aktivasi untuk membuka dan menutup valve menggunakan "Direct Driving" electric power dari solenoid coil, bukan menggunakan pressure differential. Plunger terbuat dari bahan special wear resitant stainless steel yang memiliki durabilitas dan reliabilitas yang sangat baik. Dilengkapi dengan casing epoxy resin untuk coil dan terminal box yang waterproof, yang dirancang agar aman, dan agar mudah dalam melakukan pekerjaan wiring. Dilengkapi juga dengan Strainer (tipe With Strainer) untuk menjaga kebocoran solenoid valve karena plunger tersumbat kotoran. Dapat digunakan untuk refrigerant ammonia dan freon. Biasa disebut juga dengan Valve Ammonia, Solenoid Valve Freon, Solenoid Valve Ammonia

A small, low-priced and practical limit switch. The head, box, and cover use a concave-convex meshing system to maintain robustness. The unique head structure allows a large OT and smooth operation. Easy to do wiring work with the box conduit opening open. Acquired ccc standard. Ideal for printing machines, molding machines, and light machines.

-A diaphragm type flow switch with less malfunction.

Small heavy-duty limit switch with improved sealing, impact resistance, and strength The double sealing structure of the rotating shaft is further strengthened, and the gasket full cover system ensures sealing. Wide temperature specification (-40 to +100°C: standard type). Adopts a block mount system that minimizes time loss during maintenance. UL, CSA, CCC standard acquired.

After the cutting tool is stopped due to the inertia of the machine, the lock of the protective cover is unlocked automatically by inserting the operation key to unlock the protective cover by means of a controller signal or pushbutton switch. High safety is realized by applying a voltage to the solenoid and releasing the lock for the first time. EN (TUV) standard acquisition corresponding to the CE marking. Obtained UL, CSA, CCC certification. The direct opening mechanism (NC contacts only) the contact of the switch when the protective cover door opening. Direct opening certification of the EN standard is displayed in the mark to the switch cover. The release key can be used during maintenance power outages (power failure). The body is made of robust and strong aluminum die-casting, and the inside of the box has a protection structure of IP67, UL, CSA TYPE6P, 13. Conduit ports are also installed in two horizontal and vertical directions. Series of an adjustable-type operation key corresponding to the display unit type and double doors door the operating state can be confirmed at a glance. By orientation of the four directions change of the head, Friendly insertion operation keys from four directions.

Power switch for doors with a contact gap of 3 mm or more Secures a contact gap of 3 mm or more required for power switches (standard type) . Considering safety by adopting double return spring structure and forced separation structure. A pull-on-lock mechanism with power for maintenance is also available.

Limit Switch. High Quality Material.